Rail Products

Cleaning Products


Underframe Cleaner



Bogie and underframe cleaning : R2130 should be applied by brush, spray, or by specialist foam application equipment. Foam application will give the best performance. R2130 should be used at a dilution of 1 part R2130 to 6 parts water on heavily soiled areas. Routine cleaning should be carried out at a dilution of 1 part R2130 to 20 parts water (5% dilution).

It is useful to allow the cleaner to penetrate heavy soiling for up to 20 minutes prior to rinsing. After agitation of the soiled surface by brush, R2130 should be rinsed off with fresh water, using pressure washer. It is recommended that routine cleaning should be carried out on a 6 monthly cycle.

Workshop floors : The recommended use dilution is one part R2130 to 20 parts water. Apply the solution by mop or spray and allow to penetrate the soil for up to 20 minutes. Agitate with a stiff broom. Rinse the area with water.

Workshop walls : Apply at a solution strength of 1 part R2130 to 20 parts water, preferably via foam generating equipment. Allow to penetrate the soil for a few minutes before agitation with a mop and rinsing with water. Care should be taken on painted walls. Always test on a small area first to ensure that the paintwork will not be damaged.

NOTE: Care should be taken to ensure that R2130 solutions are not allowed to dry out on painted surfaces. R2130 solutions may also damage glass if allowed to dry prior to rinsing.


R2130 is packed in 25 litre polythene containers, 200 litre polythene containers or 1000 litre returnable IBCs.

R2130 is classified as an Irritant preparation. Impervious gloves and eye protection should be worn. Further protective clothing may be required according to the quantities being used and the risk of accidental splashing.
Always consult the Dasic Safety Data Sheet before use.

Please fill in the online form below and we will
contact you at our earliest opportunity.