Aircraft Cleaning Products

Exterior Cleaning Products

Interior Cleaning Products

Aerokleen A380 Gel

Heavy duty high viscosity aqueous based aircraft exterior cleaner

  •     Viscous – high cling factor even when diluted
  •     Slow drying – extremely important in hot weather conditions
  •     High lubricity – assists brush agitation over large areas
  •     Readily water dilutable for economic usage (25% in water)
  •     Non-streaking
  •     Contains low toxicity biodegradable synthetic solvent for increased performance
  •     Biodegradable surfactants
  •     Good rinsability
  •     Complies with comprehensive aircraft approvals
  •     Complies with Regulation (EC) No 648/2004 on Detergents


Aerokleen A380 Gel is a completely new concept in aircraft cleaning. The gel structure of the product enables it to continue to solubilise deposits with minimal drying, even in adverse hot and windy weather conditions.

The unique structure of Aerokleen A380 Gel enables it to be readily applied through pressure applicators, whilst ensuring that a substantial film of product clings to the surface. The structure of this film has also been specifically developed to offer high lubricity when agitated by brush.

Aerokleen A380 Gel was primarily developed for removing soils from landing gears, wheel wells and flap cavities. However, the product has also proved highly effective in the removal of the artially carbonized greases typically found in engine exhaust and thrust reverser areas.

Aerokleen A380 Gel was formulated to be readily dilutable in water whilst retaining a reasonable degree of viscosity. The product is, therefore, extremely versatile and equally suitable for use on all areas of the aircraft exterior.

Aerokleen A380 Gel incorporates a low toxicity biodegradable synthetic solvent in conjunction with the latest products of surfactant technology in order to boost cleaning performance without compromising on environmental acceptability.

Aerokleen A380 Gel contains no petroleum distillate solvents, is non-flammable and presents no more of an effluent problem than conventional biodegradable water dilutable shampoos. The product is safe on aircraft materials and will not craze perspex.

Aerokleen A380 Gel contains no citrus ingredients and can be used in hangar environment with no perceptible odour.

 

APPLICATIONS
Aerokleen A380 Gel may be applied by brush or pressure spraying equipment.

Heavy duty cleaning
For optimum performance on landing gear areas etc., Aerokleen A380 Gel should be used either as supplied or diluted at 50% with water. The product should preferably be applied to the areas by spray. After allowing a few minutes dwell time to enable the product to solubilise the soiling, the surface should be agitated by brush and then thoroughly rinsed.

General cleaning
For cleaning other areas of the aircraft exterior such as the upper fuselage, Aerokleen A380 Gel may be effectively used at a dilution of 25% in water, using the above method of application.

Immersion cleaning of aircraft wheels
Aerokleen A380 Gel used, as an immersion product will effectively wet out and remove the soils found on aircraft wheels. Rubber and heat baked contamination present no problem to this specialised product.
The component, stator or aircraft wheel may be immersed in a tank containing neat Aerokleen A380 Gel. Its highly viscous characteristics allow the material to continue acting when the wheel has been removed from the tank and allowed to stand. Excess material should be allowed to drain back into the tank and a dwell time of approximately 15 minutes is recommended prior to water rinsing using an air/water gun. Light agitation with a brush may be beneficial.

PACKAGING
25 litre and 200 litre drums.

HEALTH & SAFETY INFORMATION
Always consult the product label and Dasic Safety Data Sheet before use.

Please fill in the online form below and we will
contact you at our earliest opportunity.

Name

Company

Email

Telephone

Message